Flo-Logger XT Portable / Permanent DC Powered Monitor
(Remote Communications)

SPECIFICATIONS

FLO-LOGGER XT PORTABLE DC POWERED ELECTRONICS

Data Storage: 64K (16K cycles of velocity/depth data)

Local Terminal: RS232C at 19.2K baud

Power Requirements
Lithium Battery Pack housed in the Logger or Alkaline Battery Pack housed in a separate waterproof enclosure.
(requires external power connector option)

Timebase accuracy: One second per day

Housing
Sealed watertight Polystyrene – meets IP68 rating
Length: 37.03 cm (14.625 in.)
Diameter: 19.69 cm (7.75 in.)
Weight: 4.4 kg (9.8 lbs) (including lithium batteries)

Temperature
Operating Range: -10 to 51 °C (14 to 125 °F)
Storage Range: -20 to 51 °C (-4 to 125 °F)

Flo-Logger Disconnect
The Flo-Logger has waterproof (IP68) connectors for easy separation from the interconnecting cable.

Remote Communications
RTU configured with a packet switched IP protocol data over a Cellular Network, supported with a FCC approved embedded cellular modem.

Certification
This Class A device complies with Part 15 of the FCC rules ID P4M-EMIV and Industry Canada RSS129 and RSS133, ID 4594A-EMIV (user licensing is not required). Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.